How to Select Etac Swift and Alto Foot, Leg and Height Adaptation Accessories
The Etac Swift and Alto mobile shower chairs are versatile bathing and toileting aids designed for users who need reliable support during personal care routines. Choosing the right accessory is key to maximizing comfort, safety, and hygiene. This guide walks you through each available accessory by category so you can match the right product to each user's needs.
Short Footrests — E80209520
What It Is: Swing-away footrests with adjustable length to accommodate shorter leg lengths or compensate for increased seat height when using thicker comfort cushions. Sold as a pair. Length: 9.5–14.375 inches.
Best For: Users with shorter legs or when seat height is increased due to thicker cushions.
- Attach the short footrests to both sides of the chair frame per the product instructions.
- Adjust the length to position the footplates at a comfortable height for the user’s leg length.
- Swing the footrests into the use position and confirm they lock securely.
- Seat the user and verify feet rest flat on the footplates without strain.
Legrest with Flip-Up Footplates — E80209446
What It Is: Height-adjustable, swing-away legrests with foldable footplates that allow angle adjustment and improved positioning. Includes heel straps. Sold as a pair. Footplates flip up for easier standing transfers.
Best For: Users who need more foot support due to limited ankle mobility.
- Attach the legrests to both sides of the chair frame and adjust height to match the user’s leg length.
- Adjust the footplate angle to match the user’s foot position for comfort and support.
- Secure the heel straps around the user’s heels to prevent foot slipping.
- When preparing for a sit-to-stand transfer, flip the footplates up to clear the floor space.
Widening Leg Support Kit — E80209525
What It Is: Adapters for extra legroom. Increases the width between leg rests by 4.75 inches. Sold as a pair. Included in all XL/wide-back configurations.
Best For: Users with larger thighs who need additional leg room.
- Attach the widening kit adapters to the leg support inserts on both sides per the product instructions.
- Confirm the adapters are fully seated and locked before use.
- Seat the user and verify the increased leg width provides adequate room without causing the legs to splay uncomfortably.
- Check that the widened position does not interfere with footrest or pan placement.
Elevating Leg and Calf Support — E80209437
What It Is: Leg rest with an adjustable angle that can be used for both left and right legs. Comes with 4 fixed-angle positions. Sold per piece.
Best For: Users with a plaster or a leg orthosis when knee flexion isn’t possible. Consider pairing with E80209443 Foot Support for leg and calf support.
- Attach the leg and calf support to the appropriate side of the chair per the product instructions.
- Select the angle position that best accommodates the user’s leg condition — choose from the 4 fixed positions.
- Seat the user and position the affected leg on the support, confirming it is fully supported without pressure points.
- If the user requires foot support, attach E80209443 Foot Support to the leg rest before seating.
Footplate for Leg and Calf Support — E80209443
What It Is: Separate foot plate used with the elevating leg supports so the foot is supported while the leg is elevated. For use with E80209437 only — this is not a standalone product.
Best For: Users using the Elevating Leg and Calf Support (E80209437) who also require foot support.
- Confirm the Elevating Leg and Calf Support (E80209437) is already installed on the chair before attaching this footplate.
- Attach the footplate to the leg rest per the product instructions.
- Adjust the footplate position to support the user’s foot comfortably with the leg elevated.
- Seat the user and position the foot on the plate, confirming full support without pressure points.
Amputee Leg Support — E80209510
What It Is: Adjustable in height, length, and angle. Can be used on both left and right sides. Provides comfortable support for users with an amputation and helps support the residual limb during sitting.
Best For: Users with an amputation. Anti-tippers are recommended when this support is in use.
- Attach the amputee leg support to the appropriate side of the chair per the product instructions.
- Adjust the height, length, and angle to comfortably support the user’s residual limb without pressure points.
- Ensure anti-tippers are installed on the chair before seating the user.
- Seat the user and position the residual limb on the support, confirming it is fully supported and comfortable.
Choosing the Right Accessory
When selecting the right option, consider: the user’s size and positioning needs, the desired seat height, back and arm comfort requirements, and the duration of use. If you have questions about compatibility or ordering, contact our team for guidance.